IGP-Ring Type Joint Gasket

Contact Us

FeedBack

RING TYPE JOINT GASKET

IGP PRODUCTS

Millions of our gaskets are successfu-
lly being used in a wide variety of
countries around the world...MORE..

Arudra Standard Construction pulleys
are provided with Steel diaphragms
(End Discs) welded with shell..MORE..

Cooling water sources cause different
tube fouling problems that affect heat
transfer and life expectancy of Heat
Exchanger and Condenser Tubing
..MORE..

Range includes rubber liners, wiper
rubbers, skirt rubber liners, belt 
repair cover compounds, abrasion &
corrosion protection rubber sheets
and general purpose rubber sheets.
..MORE..

OE supplier for mainly earth moving
machinery, drilling rigs, machine 
tools and compressor manufacturers
..MORE..

We specialise in the manufacture of
plastic injection moulded components
..MORE..

LONESTAR INDUSTRIES, a leading 
Engineering Organization based at
Chennai, India...MORE..

	Group Of Companies

	IGP ENGINEERS
	ARUDRA ENGINEERS
	ARUCHEM
	CORI ENGINEERS
	INSAP ENGINEERS
	VP ENGINEERS
	LONESTAR INDUSTRIES

Ring type Joint Gaskets :

Ring type Joint Gaskets are designed to seal by "initial line contact" or wedging action between the mating flange and the gasket. By applying pressure on the seal interface through bolt force, the softer metal of the gasket flows into the microfine structure of the harder flange material, creating a very tight and efficient seal.

CROSS SECTION

Oval Type

The contact face is in oval shape. It provides a high reliabililty seal. These gaskets comply with ASME B-16.20.

Octagonal Type

More accurate in dimensions and surface finish than oval type because it consists of straight surfaces only. A Higher torque load is required to flow the gasket material into imperfections of the flange facings.These gaskets comply with ASME B-16.20.

BX type

Designed to API 6A. Interchangeable with the oval and octagonal series of identical reference numbers, and used in the same flange grooves.

RX type

Designed to API 6A for use with grooved flanges for special applications involving high pressures from 5,000 to 15,000 psi.

IX type

AX type

CARBON STEEL, SOFT IRON		MONEL^® 400	HASTELLOY B2 & C276
304	316Ti	NICKEL 200	COPPER
304L	310	INCONEL^® 600,625&x-750	ZIRCONIUM
316	321	INCOLOY^® 800 & 825	DUPLEX
316L	3CR12	TITANIUM	PTFE(INNER RINGS ONLY)

SIZES

We manufacture Ring type joint gaskets of all sizes and shapes

FLANGE STANDARDS

Ring joint gasket can be manufactured in accordance with all relevant gasket standards and specifications to suit the following flange designations:

API	605 (ASME B16.47 SERIES B)
ASME/ANSI	B16.5
BS	1560
BS	4504
BS	10
DIN	DIN FLANGES
FRENCH	NF STANDARD
JIS	FLANGES
MSS SP	44 (ASME B16.47 SERIES A)

API Monogram

Click Here To Enlarge

Oval Type

Octagonal Type

BX type

RX type

LENS GASKET